The "Hit Air" jacket uses CE certified armor to protect the shoulders, elbows and the spine but most importantly, the "Hit Air" jacket also incorporates an air cushion system. In the event of an accident and a rider is thrown from the motorcycle, the air cushion instantly inflates (within 1/2 second) to protect the rider's body. Activation is simple and automatic. A coiled wire is attached to both the motorcycle and the jacket. Once the rider and the motorcycle are separated, the coiled wire pulls a "key" out of a gas release system and inert gas inflates the air cushion. The inflated jacket provides the necessary impact protection. After a few seconds the gas is automatically released through the gas release valve.

The "Hit Air" jacket with its instant activation is the ideal jacket for motorcyclists!
  Structure of the Airbagvest air cushion - Type A (Eu Model)
  Type B (used in JP, UK, MM Models)
  Setting up "Airbagvest"
Off the motorcycle, it's great as an ordinary jacket. On the motorcycle, a simple "click" provides the rider with the protection of the latest safety technology. A coiled wire, which is secured to the motorcycle, is fastened to the jacket's "one-touch release" button to form a system, which will activate the "Hit Air" system when needed. Let's see how easy it is to use!

How to setup :

1. Secure the coiled wire to the frame of the motorcycle.

2. Get on the motorcycle.
3. Insert the free end of the coiled wire into the "one-touch release" button.
4. Start the motorcycle and ride safely.
5. Before dismounting, simply press the red button to unfasten the jacket.

Caution!

If the "one-touch release" is not unfastened before the rider dismounts, a scooter or light motorcycle may be pulled over. If the rider is attached to a heavy bike a strong tug will act as a reminder. Failure to heed this reminder may cause the "Hit Air" to inflate unnecessarily. A force of more than 25kgs (55 lbs.) is needed to activate the air cushion.